TDS Deck Sealant is a one-part, paste-like neutral cure system which, when exposed to moisture in the air, reacts to form a tough, flexible, solid rubber compound. The sealant is a thixotropic material, which does not sag during cure, and, when cured, has excellent temperature stability and chemical resistance. Because the sealant is neutral cure, it is non-corrosive to all substrates. TDS Teak Caulking is available in black, white, or gray.
ECO-100 Teak Cleaner Powder is a new high performance, concentrated teak cleaner. Even though ECO-100 Teak Cleaner Powder contains no acid, caustic sodas or phosphates, it is a very powerful and effective cleaner that cleans and brightens without removing the soft fibers of your teak. It mixes easily in water. This product has been formulated to be 100% environmentally-friendly and represents the most advanced truly “green” teak cleaner powder in the marine industry today.
ECO-300 Teak Cleaner Liquid has been formulated to be 100% environmentally-friendly and represents the most advanced teak cleaning liquid in the marine industry today. It contains no acid, caustic sodas or phosphates and is non-toxic to the user. ECO-300 Teak Cleaner Liquid is a new ready-to-use cleaner that cleans and brightens teak better than harsh chemical cleaners, restoring its original golden color. All ingredients are approved by the National Sanitation Foundation and meet requirements for a truly “green” teak cleaner liquid for the marine industry.
TDS Teak Cleaner Liquid (TCL) is an alkaline based non-toxic cleaner that has all of the cleaning power of our TCP (powdered cleaner) in an easy to use, pre-mixed formula.
TCL 200 is excellent for removing dirt and heavy stains, particularly oil, soot-based stains and fish blood. Gentle enough to be poured directly on the teak, just scrub it and wash off. TCL is perfect for those quick, bucket-free clean-up jobs or, as part of a general wash down, when you just want to brighten or freshen up your teak without taking the time to mix a special teak-cleaning solution.
TDS FE-180A Fitting Epoxy has been formulated to achieve outstanding bond strength to most common marine materials including teak, other woods, fiberglass, aluminum and steel. The specially-engineered fillers allow the FE-180A to display superior wet-out of the bonding surfaces resulting in both a mechanical and chemical bond to adhere to even the most challenging substrates.
TDS FFE-200 Fitting Epoxy is a custom blended flexible mastic of high quality epoxy resins and activators and engineered fillers to yield a light weight, flexible and easily-sanded system used for both fairing of deck substrates and the final glue-down of deck panels. FFE-200 weighs only 6 pounds per gallon when cured and its cell-like structure makes it an excellent sound and thermal insulator. The viscosity of the FFE-200 is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding. The FFE-200 Fitting & Fairing Epoxy will cure in temperatures as low as 45° F or 7°C.
TDS FE-220T Fitting Epoxy is a specially-formulated epoxy system designed for the production boat builder. It consists of high quality resins and activators to yield a flexible bonding system for teak and most common marine substrates. Unlike most epoxies, it is a true low temperature cure down to 40º F or 4°C! FE-220T Fitting Epoxy is highly thixotropic, allowing it to be easily mixed and yet stay in place when applied to the substrate.
The Proper Tools
to do the job Right
TDS Reefing Hooks for removing caulk or other flexible materials from a seam. TDS Seam Sanders for sanding seam sides before caulking the seams. Sausage Caulking Guns for re-caulking using caulk sausages. Bond Breaker Tape for seam prep when re-caulking. Cleaning Kits for cleaning your decks.